DATA KOM
Showing all 18 resultsSorted by price: low to high
-
Battery Chargers, Uncategorized
BC5A | BC-5A Hi-Efficiency Battery Charger
BC-5A series are state of the art battery chargers featuring very high efficiency and low cost in a compact DIN rail mounted plastic package. Chargers are designed to withstand high levels of disturbances found in the harsh automotive environment. Chargers are practically impossible to destroy, having overload, short circuit, high temperature and reverse battery protections.
SKU: BC5A -
Battery Chargers, Uncategorized
SMPS125 | SMPS 125/245 BATTERY CHARGERS
SMPS series are fixed output voltage, current limited battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing
SKU: SMPS125 -
MANUAL START UNIT, Uncategorized
DKG155 | DKG-155 MANUAL START UNIT
The DKG-155 is a microprocessor controlled unit designed to start and stop the genset manually using the key switch on the front panel.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
SKU: DKG155 -
Automatic Mains Failure Units, Uncategorized
DKG105 | DKG-105 AUTOMATIC MAINS FAILURE UNIT
The DKG-105 automatic mains failure unit is a microprocessor based digital unit offering all functions needed for the automatic control of a genset.
The unit fits into a standard 72x72mm panel meter opening and offers a very cost effective and
space saving solution for the basic genset control.In automatic mode, the unit monitors 3 phases of the mains voltage
SKU: DKG105 -
Uncategorized
DKG114 | DKG-114 MANUAL AND REMOTE START UNIT
The DKG-114 is a low cost, microprocessor controlled generator control unit designed to start and stop the genset both manually and remotely.
The manual control is made using the pushbuttons on the front panel. The remote control is made via the remote start input signal.
In the STOP position, the DC supply is removed from the module, thus zero power consumption is achieved.
SKU: DKG114 -
Uncategorized
DKG116 | DKG-116 MANUAL AND REMOTE START UNIT
The DKG-116 is a low cost, comprehensive unit designed to start and stop a generating set both manually and remotely.
The unit is suitable for both gasoline and diesel gensets. The standard unit controls gasoline engines. Diesel engine control is selected with a wire jumper connection.The unit is only available in 12V version
SKU: DKG116 -
MANUAL START UNIT, Uncategorized
DKG151 | DKG-151 MANUAL START UNIT
The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
SKU: DKG151 -
Battery Chargers, Uncategorized
SMPS1210 | SMPS-1210 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing.
Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
SKU: SMPS1210 -
Battery Chargers, Uncategorized
BC1210M | BC-1210-M HI-EFFICIENCY BATTERY CHARGER
BC-1210-M series are state of the art battery chargers featuring very high efficiency and low cost in a compact metallic casing. Chargers are designed to withstand high levels of disturbances found in the harsh automotive environment. Chargers are practically impossible to destroy, having overload, short circuit, high temperature and reverse battery protections. The overload protection is current limiting type, not hiccup. Hiccup protected chargers will turn-off in case of overload and will be incapable of charging an empty battery with their rated current. In case of a short circuit or overload condition
SKU: BC1210M -
Battery Chargers, Uncategorized
SMPS2410 | SMPS-2410 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing. Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
SKU: SMPS2410 -
Automatic Mains Failure Units, Uncategorized
DKG109 | DKG-109 AUTOMATIC MAINS FAILURE UNIT
The DKG-109 is a comprehensive AMF unit for a single genset standby or dual genset mutual standby operations.
The standard model has MPU inputs. The DKG-109J model has CANBUS inputs.
The operation of the unit is controlled with front panel pushbuttons. The RUN, AUTO and STOP pushbuttons select the operating mode. Other buttons select the display parameter scroll, alarm mute and lamp test functions
SKU: DKG109 -
Automatic Mains Failure Units, Automatic Transfer Switches, Uncategorized
DKG307 | DKG-307 AUTOMATIC MAINS FAILURE UNIT
Automatic Mains Failure Units, Automatic Transfer Switches, UncategorizedDKG307 | DKG-307 AUTOMATIC MAINS FAILURE UNIT
The DKG-307 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations.
The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders.
The unit is able to initiate modem calls and send SMS messages in fault conditions through external modems
SKU: DKG307 -
Automatic Mains Failure Units, Uncategorized
D200 | D-200 Advanced Genset Controlle
The D-200 is the lowest cost genset controller
ready for internet monitoring.
Despite small dimensions and low cost, its main
advantages are multifunctionality, support for
multiple topologies, harmonic analysis and detailed power measurements.
SKU: D200 -
Automatic Mains Failure Units, Uncategorized
D300 | D-300 Advanced Genset Controller
The D-300 is a cost effective, modern technology
genset controller ready for internet monitoring.
Its main advantages are multifunctionality,
support for multiple topologies, harmonic analysis and detailed
power measurements.
SKU: D300 -
Uncategorized
D500 | D-500 Advanced Genset Controller
The D-500 is a next generation genset control unit combining multi-functionality and wide communication possibilities together with a reliable and low cost design.
The unit complies and mostly exceeds world’s tightest safety, EMC, vibration and environmental standards for the industrial category.
SKU: D500 -
Automatic Transfer Switches, Uncategorized
DKG171 | DKG-171 AUTO TRANSFER SWITCH
The DATAKOM model DKG-171 is a low cost, microprocessor controlled unit designed to monitor the 3-phase mains voltages, send remote start command to the generating set and make changeover of both generator and mains contactors. The genset is supposed to be controlled by a Remote Start type control unit.
The front panel mimic diagram provides information about mains and generator power availability as well as contactor positions
SKU: DKG171 -
Uncategorized
DKG117 | DKG-117 SYNCHROSCOPE AND CHECK SYNCH RELAY
The DKG-117 is a microprocessor controlled synchroscope with programmable synch check relay in a DIN72 front panel mounted package.
The DKG-117 is mainly used in manual genset synchronization applications for synchronization checking between a genset and the genset busbar or between the genset busbar and the mains
SKU: DKG117 -
Alarm Annunciators, MANUAL START UNIT, Uncategorized
DKM0224 | DKM-0224 Alarm Annunciator (24 channels
Alarm Annunciators, MANUAL START UNIT, UncategorizedDKM0224 | DKM-0224 Alarm Annunciator (24 channels
The DKM-0224 is a 24 channel, 144x144mm alarm annunciator, designed to be used in energy and automation systems. Optically isolated digital inputs are equipped with noise cancelling filters and are capable of operating smoothly in high electrical noise environments. The detection delay of inputs are adjustable between 2 and 500ms. The module features 3 relay outputs rated at 5Amp.
SKU: DKM0224
