SMPS series are fixed output voltage, current limited battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing
The DKG-155 is a microprocessor controlled unit designed to start and stop the genset manually using the key switch on the front panel.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
The DKG-105 automatic mains failure unit is a microprocessor based digital unit offering all functions needed for the automatic control of a genset.
The unit fits into a standard 72x72mm panel meter opening and offers a very cost effective and
space saving solution for the basic genset control.
In automatic mode, the unit monitors 3 phases of the mains voltage
The DKG-114 is a low cost, microprocessor controlled generator control unit designed to start and stop the genset both manually and remotely.
The manual control is made using the pushbuttons on the front panel. The remote control is made via the remote start input signal.
In the STOP position, the DC supply is removed from the module, thus zero power consumption is achieved.
The DKG-116 is a low cost, comprehensive unit designed to start and stop a generating set both manually and remotely.
The unit is suitable for both gasoline and diesel gensets. The standard unit controls gasoline engines. Diesel engine control is selected with a wire jumper connection.
The unit is only available in 12V version
The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
The DKG-109 is a comprehensive AMF unit for a single genset standby or dual genset mutual standby operations.
The standard model has MPU inputs. The DKG-109J model has CANBUS inputs.
The operation of the unit is controlled with front panel pushbuttons. The RUN, AUTO and STOP pushbuttons select the operating mode. Other buttons select the display parameter scroll, alarm mute and lamp test functions
The DKG-307 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations.
The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders.
The unit is able to initiate modem calls and send SMS messages in fault conditions through external modems