Reletek
-
DKG116 | DKG-116 MANUAL AND REMOTE START UNIT
The DKG-116 is a low cost, comprehensive unit designed to start and stop a generating set both manually and remotely.
The unit is suitable for both gasoline and diesel gensets. The standard unit controls gasoline engines. Diesel engine control is selected with a wire jumper connection.The unit is only available in 12V version
5,390 EGP9,800 EGP -
ESM9900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 9X9
ESM9900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 9X9
5,408 EGP10,400 EGPESM9900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 9X9
5,408 EGP10,400 EGPAdd to cart -
ESM7730 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 7X7 *
ESM7730 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 7X7 *
5,408 EGP10,400 EGP -
ESM7700 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 7X7
ESM7700 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 7X7
5,450 EGP10,480 EGPESM7700 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 7X7
5,450 EGP10,480 EGPAdd to cart -
DKG151 | DKG-151 MANUAL START UNIT
The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,500 EGP10,000 EGP -
EAOM-19 | ATS.ABOUT INSTRUCTION MANUAL
EAOM-19 | ATS.ABOUT INSTRUCTION MANUAL
5,510 EGP9,500 EGP -
ESM4930 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 5X9
ESM4930 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 5X9
5,522 EGP10,620 EGP -
ESM4435 | Universal Input, Dual Set PID Process Controller PROCESS CONTROLLER 5X5.
ESM4435 | Universal Input, Dual Set PID Process Controller PROCESS CONTROLLER 5X5.
6,131 EGP11,790 EGP -
ESM4450 | “Smart IO Module” Process Controller PROCESS CONTROLLER 5X5
ESM4450 | “Smart IO Module” Process Controller PROCESS CONTROLLER 5X5
6,292 EGP12,100 EGPESM4450 | “Smart IO Module” Process Controller PROCESS CONTROLLER 5X5
6,292 EGP12,100 EGPAdd to cart -
SMPS1210 | SMPS-1210 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing.
Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
6,300 EGP11,500 EGP -
BC1210M | BC-1210-M HI-EFFICIENCY BATTERY CHARGER
BC-1210-M series are state of the art battery chargers featuring very high efficiency and low cost in a compact metallic casing. Chargers are designed to withstand high levels of disturbances found in the harsh automotive environment. Chargers are practically impossible to destroy, having overload, short circuit, high temperature and reverse battery protections. The overload protection is current limiting type, not hiccup. Hiccup protected chargers will turn-off in case of overload and will be incapable of charging an empty battery with their rated current. In case of a short circuit or overload condition
6,325 EGP11,500 EGP -
SMPS2410 | SMPS-2410 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing. Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
7,150 EGP13,000 EGP