Hager
-
EPN515 | Latching relay 1NC+1NO 230V
EPN515 | Latching relay 1NC+1NO 230V
1,275 EGP1,500 EGPEPN515 | Latching relay 1NC+1NO 230V
1,275 EGP1,500 EGP -
EPN503 | Latching relay 1NO+1NC 48V
EPN503 | Latching relay 1NO+1NC 48V
1,360 EGP1,600 EGPEPN503 | Latching relay 1NO+1NC 48V
1,360 EGP1,600 EGP -
DKG171 | DKG-171 AUTO TRANSFER SWITCH
The DATAKOM model DKG-171 is a low cost, microprocessor controlled unit designed to monitor the 3-phase mains voltages, send remote start command to the generating set and make changeover of both generator and mains contactors. The genset is supposed to be controlled by a Remote Start type control unit.
The front panel mimic diagram provides information about mains and generator power availability as well as contactor positions
12,650 EGP23,000 EGPDKG171 | DKG-171 AUTO TRANSFER SWITCH
12,650 EGP23,000 EGP -
EMN001 | Stair case time lag switch
EMN001 | Stair case time lag switch
1,329 EGP1,563 EGPEMN001 | Stair case time lag switch
1,329 EGP1,563 EGP -
DKG155 | DKG-155 MANUAL START UNIT
The DKG-155 is a microprocessor controlled unit designed to start and stop the genset manually using the key switch on the front panel.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
4,950 EGP9,000 EGPDKG155 | DKG-155 MANUAL START UNIT
4,950 EGP9,000 EGP -
DKG151 | DKG-151 MANUAL START UNIT
The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,500 EGP10,000 EGPDKG151 | DKG-151 MANUAL START UNIT
5,500 EGP10,000 EGP -
EH111 | Time switch daily cycle with reserve 3 modules
EH111 | Time switch daily cycle with reserve 3 modules
2,210 EGP2,600 EGPEH111 | Time switch daily cycle with reserve 3 modules
2,210 EGP2,600 EGP -
EH110 | Daily time switch 1 channel, analog, 3 modules
EH110 | Daily time switch 1 channel, analog, 3 modules
1,615 EGP1,900 EGPEH110 | Daily time switch 1 channel, analog, 3 modules
1,615 EGP1,900 EGP -
EE804 | HAGER Detector 360° wall mounted
EE804 | HAGER Detector 360° wall mounted
2,536 EGP2,983 EGPEE804 | HAGER Detector 360° wall mounted
2,536 EGP2,983 EGP -
DKG117 | DKG-117 SYNCHROSCOPE AND CHECK SYNCH RELAY
The DKG-117 is a microprocessor controlled synchroscope with programmable synch check relay in a DIN72 front panel mounted package.
The DKG-117 is mainly used in manual genset synchronization applications for synchronization checking between a genset and the genset busbar or between the genset busbar and the mains
15,400 EGP28,000 EGPDKG117 | DKG-117 SYNCHROSCOPE AND CHECK SYNCH RELAY
15,400 EGP28,000 EGP -
DKG116 | DKG-116 MANUAL AND REMOTE START UNIT
The DKG-116 is a low cost, comprehensive unit designed to start and stop a generating set both manually and remotely.
The unit is suitable for both gasoline and diesel gensets. The standard unit controls gasoline engines. Diesel engine control is selected with a wire jumper connection.The unit is only available in 12V version
5,390 EGP9,800 EGPDKG116 | DKG-116 MANUAL AND REMOTE START UNIT
5,390 EGP9,800 EGP -
DKG114 | DKG-114 MANUAL AND REMOTE START UNIT
The DKG-114 is a low cost, microprocessor controlled generator control unit designed to start and stop the genset both manually and remotely.
The manual control is made using the pushbuttons on the front panel. The remote control is made via the remote start input signal.
In the STOP position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,390 EGP9,800 EGPDKG114 | DKG-114 MANUAL AND REMOTE START UNIT
5,390 EGP9,800 EGP
