| Model |
RPVA3-125 |
| Rated Voltage |
AC 220V |
| Operation Voltage Range |
AC 50V~400V |
| Rated frequency(Hz) |
50/60Hz |
| Overvoltage(>U) Setting Range |
220~300V |
| Undervoltage(<U) Setting Range |
120~210V |
| Hysteresis |
2% |
| Reset/Start Delay |
Ts: 5s~600s |
| Overcurrent Faults Trip Delay Range |
Ta: 5s~600s |
| Overvoltage(U>) Trip Delay |
<0.1s |
| Undervoltage(U<) Trip Delay |
≥120V:0.5s ,<120V: 0.1s |
| Overcurrent(I>) Trip Delay |
In<Ir *<Imax: Ta; Ir *≥Imax: ≤0.1s |
| Voltage Measurement Accuracy |
≤1%(over the whole range) |
| Rated insulation voltage |
400V |
| Output Contact |
1NO |
| Electrical Life |
10⁵ |
| Mechanical Life |
10⁶ |
| Protection Degree |
IP20 |
| (Default) Overvoltage Trip Value |
Factory setting : 250V, Setting range : 220V~300V, Step : 1V |
| (Default) Undervoltage Trip Value |
Factory setting : 170V, Setting range : 120V~210V, Step : 1V |
| (Default) Reset/Start Delay |
Factory setting : 5s, Setting range : 5s~600s, Step : 1s |
| (Default) Overcurrent Trip Value |
Factory setting : 63A, Setting range : 5A~63A, Step : 1A |
| (Default) Overcurrent Trip Delay |
Factory setting : 15s, Setting range : 5s~600s, Step : 1s |
| (Default) Asymmetry Trip Value |
Factory setting : 50%, Setting range : 20%~99%, Step : 1% |
| (Default) Continuous Overcurrent Faults Times |
Factory setting : 3, Setting range : OFF-1~20, Step : 1 |
| (Default) Phase Sequence Protection |
Factory setting : OFF, Setting range : ON-OFF |
