Reletek
-
ESM4900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 5 X 9
ESM4900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 5 X 9
4,836 EGP9,300 EGPESM4900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 5 X 9
4,836 EGP9,300 EGP -
DKG155 | DKG-155 MANUAL START UNIT
The DKG-155 is a microprocessor controlled unit designed to start and stop the genset manually using the key switch on the front panel.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
4,950 EGP9,000 EGPDKG155 | DKG-155 MANUAL START UNIT
4,950 EGP9,000 EGP -
DKG105 | DKG-105 AUTOMATIC MAINS FAILURE UNIT
The DKG-105 automatic mains failure unit is a microprocessor based digital unit offering all functions needed for the automatic control of a genset.
The unit fits into a standard 72x72mm panel meter opening and offers a very cost effective and
space saving solution for the basic genset control.In automatic mode, the unit monitors 3 phases of the mains voltage
5,390 EGP9,800 EGPDKG105 | DKG-105 AUTOMATIC MAINS FAILURE UNIT
5,390 EGP9,800 EGP -
DKG114 | DKG-114 MANUAL AND REMOTE START UNIT
The DKG-114 is a low cost, microprocessor controlled generator control unit designed to start and stop the genset both manually and remotely.
The manual control is made using the pushbuttons on the front panel. The remote control is made via the remote start input signal.
In the STOP position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,390 EGP9,800 EGPDKG114 | DKG-114 MANUAL AND REMOTE START UNIT
5,390 EGP9,800 EGP -
DKG116 | DKG-116 MANUAL AND REMOTE START UNIT
The DKG-116 is a low cost, comprehensive unit designed to start and stop a generating set both manually and remotely.
The unit is suitable for both gasoline and diesel gensets. The standard unit controls gasoline engines. Diesel engine control is selected with a wire jumper connection.The unit is only available in 12V version
5,390 EGP9,800 EGPDKG116 | DKG-116 MANUAL AND REMOTE START UNIT
5,390 EGP9,800 EGP -
ESM9900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 9X9
ESM9900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 9X9
5,408 EGP10,400 EGPESM9900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 9X9
5,408 EGP10,400 EGP -
ESM7730 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 7X7 *
ESM7730 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 7X7 *
5,408 EGP10,400 EGP -
ESM7700 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 7X7
ESM7700 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 7X7
5,450 EGP10,480 EGPESM7700 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 7X7
5,450 EGP10,480 EGP -
DKG151 | DKG-151 MANUAL START UNIT
The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,500 EGP10,000 EGPDKG151 | DKG-151 MANUAL START UNIT
5,500 EGP10,000 EGP -
EAOM-19 | ATS.ABOUT INSTRUCTION MANUAL
EAOM-19 | ATS.ABOUT INSTRUCTION MANUAL
5,510 EGP9,500 EGPEAOM-19 | ATS.ABOUT INSTRUCTION MANUAL
5,510 EGP9,500 EGP -
ESM4930 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 5X9
ESM4930 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 5X9
5,522 EGP10,620 EGP -
ESM4435 | Universal Input, Dual Set PID Process Controller PROCESS CONTROLLER 5X5.
ESM4435 | Universal Input, Dual Set PID Process Controller PROCESS CONTROLLER 5X5.
6,131 EGP11,790 EGP
