Schneider Electric
-
Schneider PKE16M434 | PratiKa wander plug – straight – 16 A – 3P + E – 380…415 V AC – IP44
Schneider PKE16M434 | PratiKa wander plug – straight – 16 A – 3P + E – 380…415 V AC – IP44
259 EGP395 EGP -
Schneider A9C20862 | Acti9, ICT 63A 2NO 220…240V 50Hz contactor
Schneider A9C20862 | Acti9, ICT 63A 2NO 220…240V 50Hz contactor
3,850 EGP6,015 EGPSchneider A9C20862 | Acti9, ICT 63A 2NO 220…240V 50Hz contactor
3,850 EGP6,015 EGP -
Schneider ATV12H055M2 | variable speed drive, Altivar 12, 0.55kW, 0.75hp, 200 to 240V, 1 phase, with heat sink
Schneider ATV12H055M2
8,013 EGP14,569 EGP -
SMPS2410 | SMPS-2410 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing. Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
7,150 EGP13,000 EGPSMPS2410 | SMPS-2410 BATTERY CHARGERS
7,150 EGP13,000 EGP -
SMPS125 | SMPS 125/245 BATTERY CHARGERS
SMPS series are fixed output voltage, current limited battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing
4,350 EGP7,900 EGPSMPS125 | SMPS 125/245 BATTERY CHARGERS
4,350 EGP7,900 EGP -
SMPS1210 | SMPS-1210 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing.
Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
6,300 EGP11,500 EGPSMPS1210 | SMPS-1210 BATTERY CHARGERS
6,300 EGP11,500 EGP -
DKM0224 | DKM-0224 Alarm Annunciator (24 channels
The DKM-0224 is a 24 channel, 144x144mm alarm annunciator, designed to be used in energy and automation systems. Optically isolated digital inputs are equipped with noise cancelling filters and are capable of operating smoothly in high electrical noise environments. The detection delay of inputs are adjustable between 2 and 500ms. The module features 3 relay outputs rated at 5Amp.
29,700 EGP54,000 EGPDKM0224 | DKM-0224 Alarm Annunciator (24 channels
29,700 EGP54,000 EGP -
DKG307 | DKG-307 AUTOMATIC MAINS FAILURE UNIT
The DKG-307 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations.
The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders.
The unit is able to initiate modem calls and send SMS messages in fault conditions through external modems
7,590 EGP13,800 EGPDKG307 | DKG-307 AUTOMATIC MAINS FAILURE UNIT
7,590 EGP13,800 EGP -
DKG171 | DKG-171 AUTO TRANSFER SWITCH
The DATAKOM model DKG-171 is a low cost, microprocessor controlled unit designed to monitor the 3-phase mains voltages, send remote start command to the generating set and make changeover of both generator and mains contactors. The genset is supposed to be controlled by a Remote Start type control unit.
The front panel mimic diagram provides information about mains and generator power availability as well as contactor positions
12,650 EGP23,000 EGPDKG171 | DKG-171 AUTO TRANSFER SWITCH
12,650 EGP23,000 EGP