Telemecanique
-
DKG114 | DKG-114 MANUAL AND REMOTE START UNIT
The DKG-114 is a low cost, microprocessor controlled generator control unit designed to start and stop the genset both manually and remotely.
The manual control is made using the pushbuttons on the front panel. The remote control is made via the remote start input signal.
In the STOP position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,390 EGP9,800 EGPDKG114 | DKG-114 MANUAL AND REMOTE START UNIT
5,390 EGP9,800 EGP -
DKG116 | DKG-116 MANUAL AND REMOTE START UNIT
The DKG-116 is a low cost, comprehensive unit designed to start and stop a generating set both manually and remotely.
The unit is suitable for both gasoline and diesel gensets. The standard unit controls gasoline engines. Diesel engine control is selected with a wire jumper connection.The unit is only available in 12V version
5,390 EGP9,800 EGPDKG116 | DKG-116 MANUAL AND REMOTE START UNIT
5,390 EGP9,800 EGP -
DKG151 | DKG-151 MANUAL START UNIT
The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,500 EGP10,000 EGPDKG151 | DKG-151 MANUAL START UNIT
5,500 EGP10,000 EGP -
XCSDMP70010 | Coded magnetic switch, Telemecanique Safety switches XCS, XCSDMP, 2 NC + 1 NO, 1 NC staggered, 10 m
XCSDMP70010 | Coded magnetic switch, Telemecanique Safety switches XCS, XCSDMP, 2 NC + 1 NO, 1 NC staggered, 10 m
5,655 EGP10,670 EGP -
XS8C4A1PCP20 | Inductive proximity sensors XS, inductive sensor XS8 40x40x117, PBT, Sn20 mm, 12…48 VDC, terminals
XS8C4A1PCP20 | Inductive proximity sensors XS, inductive sensor XS8 40x40x117, PBT, Sn20 mm, 12…48 VDC, terminals
5,677 EGP10,711 EGP -
XMLP010BD21F | Electronic pressure sensors, Pressure sensors XM, transmitter, XMLP, 10 bar, G1/4 A male, 4…20 mA, M12, set of 1
XMLP010BD21F | Electronic pressure sensors, Pressure sensors XM, transmitter, XMLP, 10 bar, G1/4 A male, 4…20 mA, M12, set of 1
5,773 EGP10,893 EGP -
XMLPM05GD21F | Electronic pressure sensors, Pressure sensors XM, transmitter -1…5 bar, 4…20 mA, G1/4 A male, FPM, M12
XMLPM05GD21F | Electronic pressure sensors, Pressure sensors XM, transmitter -1…5 bar, 4…20 mA, G1/4 A male, FPM, M12
5,773 EGP10,893 EGP -
XMLP016BD21F | Electronic pressure sensors, Pressure sensors XM, transmitter, XMLP, 16 bar, G1/4 A male, 4…20 mA, M12, set of 1
XMLP016BD21F | Electronic pressure sensors, Pressure sensors XM, transmitter, XMLP, 16 bar, G1/4 A male, 4…20 mA, M12, set of 1
5,773 EGP10,893 EGP -
XMLA004A2S11 | Pressure switch XMLA 4 bar – fixed scale 1 threshold – 1 C/O
XMLA004A2S11 | Pressure switch XMLA 4 bar – fixed scale 1 threshold – 1 C/O
6,294 EGP11,876 EGPXMLA004A2S11 | Pressure switch XMLA 4 bar – fixed scale 1 threshold – 1 C/O
6,294 EGP11,876 EGP -
SMPS1210 | SMPS-1210 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing.
Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
6,300 EGP11,500 EGPSMPS1210 | SMPS-1210 BATTERY CHARGERS
6,300 EGP11,500 EGP -
BC1210M | BC-1210-M HI-EFFICIENCY BATTERY CHARGER
BC-1210-M series are state of the art battery chargers featuring very high efficiency and low cost in a compact metallic casing. Chargers are designed to withstand high levels of disturbances found in the harsh automotive environment. Chargers are practically impossible to destroy, having overload, short circuit, high temperature and reverse battery protections. The overload protection is current limiting type, not hiccup. Hiccup protected chargers will turn-off in case of overload and will be incapable of charging an empty battery with their rated current. In case of a short circuit or overload condition
6,325 EGP11,500 EGPBC1210M | BC-1210-M HI-EFFICIENCY BATTERY CHARGER
6,325 EGP11,500 EGP
