Shop
-
Schneider PKE16M434 | PratiKa wander plug – straight – 16 A – 3P + E – 380…415 V AC – IP44
Schneider PKE16M434 | PratiKa wander plug – straight – 16 A – 3P + E – 380…415 V AC – IP44
259 EGP395 EGP -
Schneider A9C20862 | Acti9, ICT 63A 2NO 220…240V 50Hz contactor
Schneider A9C20862 | Acti9, ICT 63A 2NO 220…240V 50Hz contactor
3,850 EGP6,015 EGP -
Schneider ATV12H055M2 | variable speed drive, Altivar 12, 0.55kW, 0.75hp, 200 to 240V, 1 phase, with heat sink
Schneider ATV12H055M2
8,013 EGP14,569 EGP -
ABLS1A24031 | Regulated Power Supply, 100-240V AC, 24V 3.1 A, single phase, Optimized
ABLS1A24031 | Regulated Power Supply, 100-240V AC, 24V 3.1 A, single phase, Optimized
5,662 EGP10,294 EGP -
Schneider XA2EA31 Harmony | Round Green push-button Ø 22 – flush spring return – 1NO
Schneider XA2EA31 Harmony
90 EGP164 EGP -
Schneider EZ9C1263 | EASY9 2P 63A VOLTAGE RELAY
Schneider EZ9C1263 | EASY9 2P 63A VOLTAGE RELAY
1,431 EGP2,185 EGP -
SMPS2410 | SMPS-2410 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing. Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
7,150 EGP13,000 EGP -
SMPS125 | SMPS 125/245 BATTERY CHARGERS
SMPS series are fixed output voltage, current limited battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing
4,350 EGP7,900 EGP -
SMPS1210 | SMPS-1210 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing.
Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
6,300 EGP11,500 EGP
