Shop
-
Schneider PKE16M434 | PratiKa wander plug – straight – 16 A – 3P + E – 380…415 V AC – IP44
Schneider PKE16M434 | PratiKa wander plug – straight – 16 A – 3P + E – 380…415 V AC – IP44
259 EGP395 EGP -
Schneider A9C20862 | Acti9, ICT 63A 2NO 220…240V 50Hz contactor
Schneider A9C20862 | Acti9, ICT 63A 2NO 220…240V 50Hz contactor
3,850 EGP6,015 EGPSchneider A9C20862 | Acti9, ICT 63A 2NO 220…240V 50Hz contactor
3,850 EGP6,015 EGP -
Schneider ATV12H055M2 | variable speed drive, Altivar 12, 0.55kW, 0.75hp, 200 to 240V, 1 phase, with heat sink
Schneider ATV12H055M2
8,013 EGP14,569 EGP -
MMS32K23 | Motor guard circuit breaker 17 to 23 A MMS-32K – Hyundai Electric
MMS32K23 | Motor guard circuit breaker 17 to 23 A MMS-32K – Hyundai Electric
920 EGP1,150 EGP -
RPVA3-125 | Double 3 digit display for operating voltage value
Model RPVA3-125 Rated Voltage AC 220V Operation Voltage Range AC 50V~400V Rated frequency(Hz) 50/60Hz Overvoltage(>U) Setting Range 220~300V Undervoltage(<U) Setting Range 120~210V Hysteresis 2% Reset/Start Delay Ts: 5s~600s Overcurrent Faults Trip Delay Range Ta: 5s~600s Overvoltage(U>) Trip Delay <0.1s Undervoltage(U<) Trip Delay ≥120V:0.5s ,<120V: 0.1s Overcurrent(I>) Trip Delay In<Ir *<Imax: Ta; Ir *≥Imax: ≤0.1s Voltage Measurement Accuracy ≤1%(over the whole range) Rated insulation voltage 400V Output Contact 1NO Electrical Life 10⁵ Mechanical Life 10⁶ Protection Degree IP20 (Default) Overvoltage Trip Value Factory setting : 250V, Setting range : 220V~300V, Step : 1V (Default) Undervoltage Trip Value Factory setting : 170V, Setting range : 120V~210V, Step : 1V (Default) Reset/Start Delay Factory setting : 5s, Setting range : 5s~600s, Step : 1s (Default) Overcurrent Trip Value Factory setting : 63A, Setting range : 5A~63A, Step : 1A (Default) Overcurrent Trip Delay Factory setting : 15s, Setting range : 5s~600s, Step : 1s (Default) Asymmetry Trip Value Factory setting : 50%, Setting range : 20%~99%, Step : 1% (Default) Continuous Overcurrent Faults Times Factory setting : 3, Setting range : OFF-1~20, Step : 1 (Default) Phase Sequence Protection Factory setting : OFF, Setting range : ON-OFF 3,100 EGP4,150 EGPRPVA3-125 | Double 3 digit display for operating voltage value
3,100 EGP4,150 EGP -
RD-MVA
- switch guard Reletek
- Double 3 digit display for operating voltage value
- Protect electrical device against overvoltage and undervoltage
- Reset/start delay adjustable(5~600s)
- Voltage measurement accuracy ≤1%
- Parameters setting by keys
- LEDs indication for overvoltage and undervoltage faults
- 3 Module, DIN Rail mounting
780 EGP1,200 EGPRD-MVA
780 EGP1,200 EGP -
MY132 | MCB 1P 4.5kA C-32A 1M
MY132 | MCB 1P 4.5kA C-32A 1M
-
Frequency50 to 60 Hz
Power-
Total power loss under IN1.63 W
-
Power loss per pole at In1.63 W
179 EGP210 EGPMY132 | MCB 1P 4.5kA C-32A 1M
179 EGP210 EGP -
-
MY125 | MCB 1P 4.5kA C-25A 1M
MY125 | MCB 1P 4.5kA C-25A 1M
-
Frequency50 to 60 Hz
Power-
Total power loss under IN1.63 W
-
Power loss per pole at In1.63 W
179 EGP210 EGPMY125 | MCB 1P 4.5kA C-25A 1M
179 EGP210 EGP -
-
MY120 | MCB 1P 4.5kA C-20A 1M
MY120 | MCB 1P 4.5kA C-20A 1M
-
Frequency50 to 60 Hz
Power-
Total power loss under IN1.63 W
-
Power loss per pole at In1.63 W
179 EGP210 EGPMY120 | MCB 1P 4.5kA C-20A 1M
179 EGP210 EGP -
