Shop
-
SE-1000-48 | SE-1000-48 1000W Out 48V/20.8A
Wattage: 1000W
Input: 115/230
Output: 5, 9, 12, 15, 24, 48
L: 278
W: 12711,300 EGPSE-1000-48 | SE-1000-48 1000W Out 48V/20.8A
11,300 EGP -
HLF390 | MCB 3P 10kA C-100A 4.5M
HLF390 | MCB 3P 10kA C-100A 4.5M
5,015 EGP5,900 EGPHLF390 | MCB 3P 10kA C-100A 4.5M
5,015 EGP5,900 EGP -
NDR-240-24 | AC-DC Single output Industrial DIN rail power supply
AC-DC Single output Industrial DIN rail power supply
Output 24Vdc at 10A
metal case
3,524 EGP7,047 EGPNDR-240-24 | AC-DC Single output Industrial DIN rail power supply
3,524 EGP7,047 EGP -
RPVA3-125 | Double 3 digit display for operating voltage value
Model RPVA3-125 Rated Voltage AC 220V Operation Voltage Range AC 50V~400V Rated frequency(Hz) 50/60Hz Overvoltage(>U) Setting Range 220~300V Undervoltage(<U) Setting Range 120~210V Hysteresis 2% Reset/Start Delay Ts: 5s~600s Overcurrent Faults Trip Delay Range Ta: 5s~600s Overvoltage(U>) Trip Delay <0.1s Undervoltage(U<) Trip Delay ≥120V:0.5s ,<120V: 0.1s Overcurrent(I>) Trip Delay In<Ir *<Imax: Ta; Ir *≥Imax: ≤0.1s Voltage Measurement Accuracy ≤1%(over the whole range) Rated insulation voltage 400V Output Contact 1NO Electrical Life 10⁵ Mechanical Life 10⁶ Protection Degree IP20 (Default) Overvoltage Trip Value Factory setting : 250V, Setting range : 220V~300V, Step : 1V (Default) Undervoltage Trip Value Factory setting : 170V, Setting range : 120V~210V, Step : 1V (Default) Reset/Start Delay Factory setting : 5s, Setting range : 5s~600s, Step : 1s (Default) Overcurrent Trip Value Factory setting : 63A, Setting range : 5A~63A, Step : 1A (Default) Overcurrent Trip Delay Factory setting : 15s, Setting range : 5s~600s, Step : 1s (Default) Asymmetry Trip Value Factory setting : 50%, Setting range : 20%~99%, Step : 1% (Default) Continuous Overcurrent Faults Times Factory setting : 3, Setting range : OFF-1~20, Step : 1 (Default) Phase Sequence Protection Factory setting : OFF, Setting range : ON-OFF 3,100 EGP4,150 EGPRPVA3-125 | Double 3 digit display for operating voltage value
3,100 EGP4,150 EGP -
EPN525 | Latching relay 2NC+2NO 230V
EPN525 | Latching relay 2NC+2NO 230V
2,720 EGP3,200 EGPEPN525 | Latching relay 2NC+2NO 230V
2,720 EGP3,200 EGP -
EE804 | HAGER Detector 360° wall mounted
EE804 | HAGER Detector 360° wall mounted
2,536 EGP2,983 EGPEE804 | HAGER Detector 360° wall mounted
2,536 EGP2,983 EGP -
EDR-120-12 | AC-DC Industrial DIN rail power supply; Output 12V at 10A; metal case
AC-DC Industrial DIN rail power supply; Output 12V at 10A; metal case
- Output voltage: 12VDC
- Output current: 10A
- Output power: 120W
2,444 EGP4,887 EGP -
XLG-200-12-A | AC-DC Single output LED driver Constant Power Mode with built-in PFC
AC-DC Single output LED driver Constant Power Mode with built-in PFC
Output 12Vdc at 16A
Metal housing design; IP67
Built-in potentiometer
2,400 EGP -
EH111 | Time switch daily cycle with reserve 3 modules
EH111 | Time switch daily cycle with reserve 3 modules
2,210 EGP2,600 EGPEH111 | Time switch daily cycle with reserve 3 modules
2,210 EGP2,600 EGP -
LRS-350-12 | power supply DC output voltage of 12VDC at a rated current of 29A.
LRS-350-12 350W Single Output Switching Power Supply
Wattage: 350W
Input: 115/230Vac
Output: 2~3.3, 4.2, 5, 12, 15, 24, 36 48Vdc
Dimension:
L: 215
W: 115
H: 302,163 EGP4,325 EGP -
LRS-350-24 | 350W Single Output Switching Power Supply
Wattage: 350W
Input: 115~230Vac
Output: 24Vdc
Dimension(mm):
L: 215
W: 115
H: 302,023 EGP4,045 EGPLRS-350-24 | 350W Single Output Switching Power Supply
2,023 EGP4,045 EGP -
XLG-150-H-A | AC-DC Single output LED driver Constant Power Mode with built-in PFC
AC-DC Single output LED driver Constant Power Mode with built-in PFC
Output 56Vdc at 4.17A
Metal housing design; IP67
Built-in potentiometer
2,000 EGP
