-46%
Schneider LC1D40008M7 | TeSys D contactor – 4P(2 NO + 2 NC) – AC-1
Schneider LC1D40008M7 | TeSys D contactor – 4P(2 NO + 2 NC) – AC-1 <= 440 V 60 A 220 V AC 50/60 Hz coil - Image 2
Schneider LC1D40008M7 | TeSys D contactor – 4P(2 NO + 2 NC) – AC-1 <= 440 V 60 A 220 V AC 50/60 Hz coil - Image 3
Schneider LC1D40008M7 | TeSys D contactor – 4P(2 NO + 2 NC) – AC-1

Schneider LC1D40008M7 | TeSys D contactor – 4P(2 NO + 2 NC) – AC-1 <= 440 V 60 A 220 V AC 50/60 Hz coil

Availability:

Out of stock
Compare
New modern look & feel of all machines
Designed to meet the requirements of industrial and HVAC applications
Easier to install and operate with multi-standard screws
With IEC60335-1 compliance, improved fire resistance, and dustproof auxiliaries
Digital customer experience for technical documents

5,421.90 EGP 10,040.55 EGP

Out of stock

Compare

Schneider LC1D40008M7 | TeSys D contactor – 4P(2 NO + 2 NC) – AC-1

Product Name:

Schneider LC1D40008M7 – TeSys D Contactor

1. Overview:

The LC1D40008M7 is a 4-pole contactor from Schneider Electric’s TeSys D series. It is designed for switching general-purpose electrical loads (AC-1 duty) such as resistive loads, heating elements, and lighting circuits.

This model supports up to 60A at 440V, and uses a 220V AC coil (50/60 Hz) for control operation. It has a 2 NO + 2 NC contact configuration.

2. Key Specifications:

Feature Description
Contactor Type Electromechanical, 4 poles (2 NO + 2 NC)
Rated Current (AC-1) 60A – for non-inductive or slightly inductive loads
Main Circuit Voltage Up to 440V AC
Control Coil Voltage 220V AC, 50/60 Hz
Contact Arrangement 2 Normally Open (NO) + 2 Normally Closed (NC)
Series TeSys D – modular, compact, and durable

3. Functionality:

  • AC-1 Duty Application:
    Designed for non-motor loads such as:

    • Heating circuits

    • Lighting loads

    • Capacitor banks

    • Distribution systems

  • 4-Pole Switching:
    Allows switching of three phases plus neutral or use in two separate circuits.

  • Versatile Contact Setup (2NO + 2NC):

    • NO (Normally Open): Closes when coil is energized – powers the load.

    • NC (Normally Closed): Opens when coil is energized – often used for interlocking or control logic.

4. Coil and Operation:

  • 220V AC Coil:
    Accepts standard mains voltage (single-phase), commonly used in control panels.

  • Silent and Efficient:
    The TeSys D series is known for low coil power consumption and mechanical durability.

5. Applications:

  • Resistive Load Control (heaters, ovens)

  • Lighting Systems

  • Power Distribution Switching

  • Controlling Neutral + 3 Phase lines

  • Automation Panels

  • Control Logic Circuits (using NO/NC contacts)

6. Installation & Integration:

  • Mounting:
    Compatible with DIN rail or screw mounting.

  • Expandable:
    Can be equipped with auxiliary contacts, timers, or mechanical interlocks.

  • Compatible with TeSys Accessories:
    Such as overload relays and interface modules.

7. Summary:

The Schneider LC1D40008M7 is a 60A, 4-pole contactor designed for AC-1 applications (non-inductive loads), with a 220V AC control coil. It features 2 NO + 2 NC contacts for flexible wiring in heating, lighting, or distribution systems. Reliable, durable, and part of the modular TeSys D series, it is widely used in industrial and commercial installations.

SKU: LC1D40008M7 Category: Brand:
brands

Schneider Electric

date sheet

https://www.se.com/eg/en/product/download-pdf/LC1D40008M7?filename=Schneider+Electric_TeSys-D_LC1D40008M7.pdf

Specifications

Main
Range TeSys
Range of product TeSys Deca
Product or component type Contactor
Device short name LC1D
Contactor application Resistive load
Utilisation category AC-1
Poles description 4P
[Ue] rated operational voltage Power circuit: <= 690 V AC 25…400 Hz
Power circuit: <= 300 V DC
[Ie] rated operational current 60 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
[Uc] control circuit voltage 220 V AC 50/60 Hz
Complementary
Compatibility code LC1D
Pole contact composition 2 NO + 2 NC
Protective cover With
[Ith] conventional free air thermal current 60 A (at 60 °C) for power circuit
Irms rated making capacity 800 A at 440 V for power circuit conforming to IEC 60947
Rated breaking capacity 800 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current 320 A 40 °C – 10 s for power circuit
720 A 40 °C – 1 s for power circuit
72 A 40 °C – 10 min for power circuit
165 A 40 °C – 1 min for power circuit
Associated fuse rating 80 A gG at <= 690 V coordination type 1 for power circuit
80 A gG at <= 690 V coordination type 2 for power circuit
Average impedance 1.5 mOhm – Ith 60 A 50 Hz for power circuit
Power dissipation per pole 5.4 W AC-1
[Ui] rated insulation voltage Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Power circuit: 690 V conforming to IEC 60947-4-1
Overvoltage category III
Pollution degree 3
[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947
Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Mechanical durability 6 Mcycles
Electrical durability 1.4 Mcycles 60 A AC-1 at Ue <= 440 V
Control circuit type AC at 50/60 Hz
Coil technology Without built-in suppressor module
Control circuit voltage limits 0.3…0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz
0.8…1.1 Uc (-40…60 °C):operational AC 50 Hz
0.85…1.1 Uc (-40…60 °C):operational AC 60 Hz
1…1.1 Uc (60…70 °C):operational AC 50/60 Hz
Inrush power in VA 140 VA 60 Hz cos phi 0.75 (at 20 °C)
160 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold-in power consumption in VA 13 VA 60 Hz cos phi 0.3 (at 20 °C)
15 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat dissipation 4…5 W at 50/60 Hz
Operating time 4…19 ms opening
12…26 ms closing
Maximum operating rate 3600 cyc/h at 60 °C
Connections – terminals Control circuit: screw clamp terminals 2 1…2.5 mm² – cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 2 1…4 mm² – cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: solid without cable end
Control circuit: screw clamp terminals 2 1…4 mm² – cable stiffness: solid without cable end
Power circuit: screw clamp terminals 1 1…35 mm² – cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 2 1…25 mm² – cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 1 1…35 mm² – cable stiffness: flexible with cable end
Power circuit: screw clamp terminals 2 1…25 mm² – cable stiffness: flexible with cable end
Power circuit: screw clamp terminals 1 1…35 mm² – cable stiffness: solid without cable end
Power circuit: screw clamp terminals 2 1…25 mm² – cable stiffness: solid without cable end
Tightening torque Control circuit: 1.7 N.m – on screw clamp terminals – with screwdriver flat Ø 6 mm
Control circuit: 1.7 N.m – on screw clamp terminals – with screwdriver Philips No 2
Power circuit: 8 N.m – on screw clamp terminals – cable 25…35 mm² hexagonal screw head 4 mm
Power circuit: 5 N.m – on screw clamp terminals – cable 1…25 mm² hexagonal screw head 4 mm
Control circuit: 1.7 N.m – on screw clamp terminals – with screwdriver pozidriv No 2
Mounting support Plate
Rail
Environment
Standards CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508
Product certifications RINA
GL
UL
GOST
BV
LROS (Lloyds register of shipping)
DNV
CCC
CSA
IP degree of protection IP20 front face conforming to IEC 60529
Protective treatment TH conforming to IEC 60068-2-30
Climatic withstand conforming to IACS E10 exposure to damp heat
Permissible ambient air temperature around the device -40…60 °C
60…70 °C with derating
Operating altitude 0…3000 m
Fire resistance 850 °C conforming to IEC 60695-2-1
Flame retardance V1 conforming to UL 94
Mechanical robustness Shocks contactor open (8 Gn for 11 ms)
Shocks contactor closed (10 Gn for 11 ms)
Vibrations contactor opened (2 Gn, 5…300 Hz)
Vibrations contactor closed (4 Gn, 5…300 Hz)
Height 127 mm
Width 85 mm
Depth 125 mm
Net weight 1.44 kg
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 11.2 cm
Package 1 Width 13.5 cm
Package 1 Length 15.2 cm
Package 1 Weight 1.47 kg
Unit Type of Package 2 S02
Number of Units in Package 2 5
Package 2 Height 15 cm
Package 2 Width 30 cm
Package 2 Length 40 cm
Package 2 Weight 7.605 kg
Contractual warranty
Warranty 18 months

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Schneider LC1D40008M7 | TeSys D contactor – 4P(2 NO + 2 NC) – AC-1 <= 440 V 60 A 220 V AC 50/60 Hz coil”

There are no reviews yet.

SHOPPING CART

close

Select at least 2 products
to compare