Shop
-
DKG151 | DKG-151 MANUAL START UNIT
The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,500 EGP10,000 EGPDKG151 | DKG-151 MANUAL START UNIT
5,500 EGP10,000 EGP -
SMPS1210 | SMPS-1210 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing.
Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
6,300 EGP11,500 EGPSMPS1210 | SMPS-1210 BATTERY CHARGERS
6,300 EGP11,500 EGP -
BC1210M | BC-1210-M HI-EFFICIENCY BATTERY CHARGER
BC-1210-M series are state of the art battery chargers featuring very high efficiency and low cost in a compact metallic casing. Chargers are designed to withstand high levels of disturbances found in the harsh automotive environment. Chargers are practically impossible to destroy, having overload, short circuit, high temperature and reverse battery protections. The overload protection is current limiting type, not hiccup. Hiccup protected chargers will turn-off in case of overload and will be incapable of charging an empty battery with their rated current. In case of a short circuit or overload condition
6,325 EGP11,500 EGPBC1210M | BC-1210-M HI-EFFICIENCY BATTERY CHARGER
6,325 EGP11,500 EGP -
HGC185 | Hyundai Magnetic Contactor HGC185
HGC185 | Hyundai Magnetic Contactor HGC185
Contacts:
Main, AC/DC – 2NO2NC
Auxilliary, AC/DC – 2NO2NC
Dimensions, AC/DC: 138 x 204 x 174.2 mm
Weight, AC/DC: 4.8kg6,507 EGP8,450 EGPHGC185 | Hyundai Magnetic Contactor HGC185
6,507 EGP8,450 EGP -
HGM400E3P400 | HGM400-E3P400F HYUNDAI INT. AUT. HGM400 3P, 45KA 380/415V, 250-400A, LTD 0.63-1XIN, INST 10XIN
HGM400E3P400 | HGM400-E3P400F HYUNDAI INT. AUT. HGM400 3P, 45KA 380/415V, 250-400A, LTD 0.63-1XIN, INST 10XIN
7,007 EGP9,100 EGP -
SMPS2410 | SMPS-2410 BATTERY CHARGERS
DATAKOM SMPS series are fixed output voltage, current limited lead acid and Nickel-Cadmium battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing. Thanks to their continuous DC outputs they may also be used in a vide range of industrial applications where DC power is required.
When the battery voltage is below the float charge level, the charger provides constant current, nearly equal to the rated output current allowing a rapid recovery of the missing charge
7,150 EGP13,000 EGPSMPS2410 | SMPS-2410 BATTERY CHARGERS
7,150 EGP13,000 EGP -
HGC225 | Hyundai Magnetic Contactor HGC225
HGC225 | Hyundai Magnetic Contactor HGC225
Contacts:
Main, AC/DC – 2NO2NC
Auxilliary, AC/DC – 2NO2NC
Dimensions, AC/DC: 138 x 204 x 174.2 mm
Weight, AC/DC: 4.8kg7,277 EGP9,451 EGPHGC225 | Hyundai Magnetic Contactor HGC225
7,277 EGP9,451 EGP -
DKG109 | DKG-109 AUTOMATIC MAINS FAILURE UNIT
The DKG-109 is a comprehensive AMF unit for a single genset standby or dual genset mutual standby operations.
The standard model has MPU inputs. The DKG-109J model has CANBUS inputs.
The operation of the unit is controlled with front panel pushbuttons. The RUN, AUTO and STOP pushbuttons select the operating mode. Other buttons select the display parameter scroll, alarm mute and lamp test functions
7,370 EGP13,400 EGPDKG109 | DKG-109 AUTOMATIC MAINS FAILURE UNIT
7,370 EGP13,400 EGP -
DKG307 | DKG-307 AUTOMATIC MAINS FAILURE UNIT
The DKG-307 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations.
The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders.
The unit is able to initiate modem calls and send SMS messages in fault conditions through external modems
7,590 EGP13,800 EGPDKG307 | DKG-307 AUTOMATIC MAINS FAILURE UNIT
7,590 EGP13,800 EGP -
D200 | D-200 Advanced Genset Controlle
The D-200 is the lowest cost genset controller
ready for internet monitoring.
Despite small dimensions and low cost, its main
advantages are multifunctionality, support for
multiple topologies, harmonic analysis and detailed power measurements.
7,645 EGP13,900 EGPD200 | D-200 Advanced Genset Controlle
7,645 EGP13,900 EGP -
HGM400S3P400 | HGM400-S3P400F HYUNDAI INT. AUT. HGM400 3P, 65KA 380/415V, 250-400A, LTD 0.63-1XIN, INST 10XIN
HGM400S3P400 | HGM400-S3P400F HYUNDAI INT. AUT. HGM400 3P, 65KA 380/415V, 250-400A, LTD 0.63-1XIN, INST 10XIN
8,482 EGP11,016 EGP -
D300 | D-300 Advanced Genset Controller
The D-300 is a cost effective, modern technology
genset controller ready for internet monitoring.
Its main advantages are multifunctionality,
support for multiple topologies, harmonic analysis and detailed
power measurements.
9,900 EGP18,000 EGPD300 | D-300 Advanced Genset Controller
9,900 EGP18,000 EGP
