Shop
-
EPN525 | Latching relay 2NC+2NO 230V
EPN525 | Latching relay 2NC+2NO 230V
2,720 EGP3,200 EGP -
EPN518 | Latching relay 1NC+1NO 24V
EPN518 | Latching relay 1NC+1NO 24V
1,360 EGP1,600 EGP -
EPN515 | Latching relay 1NC+1NO 230V
EPN515 | Latching relay 1NC+1NO 230V
1,275 EGP1,500 EGP -
EPN503 | Latching relay 1NO+1NC 48V
EPN503 | Latching relay 1NO+1NC 48V
1,360 EGP1,600 EGP -
DKG171 | DKG-171 AUTO TRANSFER SWITCH
The DATAKOM model DKG-171 is a low cost, microprocessor controlled unit designed to monitor the 3-phase mains voltages, send remote start command to the generating set and make changeover of both generator and mains contactors. The genset is supposed to be controlled by a Remote Start type control unit.
The front panel mimic diagram provides information about mains and generator power availability as well as contactor positions
12,650 EGP23,000 EGP -
EMN001 | Stair case time lag switch
EMN001 | Stair case time lag switch
1,329 EGP1,563 EGP -
DKG155 | DKG-155 MANUAL START UNIT
The DKG-155 is a microprocessor controlled unit designed to start and stop the genset manually using the key switch on the front panel.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
4,950 EGP9,000 EGP -
DKG151 | DKG-151 MANUAL START UNIT
The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,500 EGP10,000 EGP -
EH111 | Time switch daily cycle with reserve 3 modules
EH111 | Time switch daily cycle with reserve 3 modules
2,210 EGP2,600 EGP -
EH110 | Daily time switch 1 channel, analog, 3 modules
EH110 | Daily time switch 1 channel, analog, 3 modules
1,615 EGP1,900 EGP -
EE804 | HAGER Detector 360° wall mounted
EE804 | HAGER Detector 360° wall mounted
2,536 EGP2,983 EGP -
DKG117 | DKG-117 SYNCHROSCOPE AND CHECK SYNCH RELAY
The DKG-117 is a microprocessor controlled synchroscope with programmable synch check relay in a DIN72 front panel mounted package.
The DKG-117 is mainly used in manual genset synchronization applications for synchronization checking between a genset and the genset busbar or between the genset busbar and the mains
15,400 EGP28,000 EGP