Shop
-
HLF390 | MCB 3P 10kA C-100A 4.5M
HLF390 | MCB 3P 10kA C-100A 4.5M
5,015 EGP5,900 EGPHLF390 | MCB 3P 10kA C-100A 4.5M
5,015 EGP5,900 EGP -
DKG307 | DKG-307 AUTOMATIC MAINS FAILURE UNIT
The DKG-307 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations.
The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders.
The unit is able to initiate modem calls and send SMS messages in fault conditions through external modems
7,590 EGP13,800 EGPDKG307 | DKG-307 AUTOMATIC MAINS FAILURE UNIT
7,590 EGP13,800 EGP -
EPN525 | Latching relay 2NC+2NO 230V
EPN525 | Latching relay 2NC+2NO 230V
2,720 EGP3,200 EGPEPN525 | Latching relay 2NC+2NO 230V
2,720 EGP3,200 EGP -
EPN518 | Latching relay 1NC+1NO 24V
EPN518 | Latching relay 1NC+1NO 24V
1,360 EGP1,600 EGPEPN518 | Latching relay 1NC+1NO 24V
1,360 EGP1,600 EGP -
EPN515 | Latching relay 1NC+1NO 230V
EPN515 | Latching relay 1NC+1NO 230V
1,275 EGP1,500 EGPEPN515 | Latching relay 1NC+1NO 230V
1,275 EGP1,500 EGP -
EPN503 | Latching relay 1NO+1NC 48V
EPN503 | Latching relay 1NO+1NC 48V
1,360 EGP1,600 EGPEPN503 | Latching relay 1NO+1NC 48V
1,360 EGP1,600 EGP -
DKG171 | DKG-171 AUTO TRANSFER SWITCH
The DATAKOM model DKG-171 is a low cost, microprocessor controlled unit designed to monitor the 3-phase mains voltages, send remote start command to the generating set and make changeover of both generator and mains contactors. The genset is supposed to be controlled by a Remote Start type control unit.
The front panel mimic diagram provides information about mains and generator power availability as well as contactor positions
12,650 EGP23,000 EGPDKG171 | DKG-171 AUTO TRANSFER SWITCH
12,650 EGP23,000 EGP -
DKG155 | DKG-155 MANUAL START UNIT
The DKG-155 is a microprocessor controlled unit designed to start and stop the genset manually using the key switch on the front panel.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
4,950 EGP9,000 EGPDKG155 | DKG-155 MANUAL START UNIT
4,950 EGP9,000 EGP -
EMN001 | Stair case time lag switch
EMN001 | Stair case time lag switch
1,329 EGP1,563 EGPEMN001 | Stair case time lag switch
1,329 EGP1,563 EGP -
EH111 | Time switch daily cycle with reserve 3 modules
EH111 | Time switch daily cycle with reserve 3 modules
2,210 EGP2,600 EGPEH111 | Time switch daily cycle with reserve 3 modules
2,210 EGP2,600 EGP -
DKG151 | DKG-151 MANUAL START UNIT
The DATAKOM model DKG-151 is a low cost, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,500 EGP10,000 EGPDKG151 | DKG-151 MANUAL START UNIT
5,500 EGP10,000 EGP -
EH110 | Daily time switch 1 channel, analog, 3 modules
EH110 | Daily time switch 1 channel, analog, 3 modules
1,615 EGP1,900 EGPEH110 | Daily time switch 1 channel, analog, 3 modules
1,615 EGP1,900 EGP
