Shop
-
SMPS125 | SMPS 125/245 BATTERY CHARGERS
SMPS series are fixed output voltage, current limited battery chargers specially designed for permanent connection to genset starter batteries.
They maintain the batteries fully charged, without overcharging or gassing
4,350 EGP7,900 EGPSMPS125 | SMPS 125/245 BATTERY CHARGERS
4,350 EGP7,900 EGP -
ESM4400 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER. 5X5
ESM4400 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER. 5X5
4,742 EGP9,120 EGP -
ESM4430 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 5X5
ESM4430 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 5X5
4,789 EGP9,210 EGP -
EZM4430 | Single Set Programmable Counter COUNTER 5 * 5
EZM4430 | Single Set Programmable Counter
4,810 EGP9,250 EGPEZM4430 | Single Set Programmable Counter COUNTER 5 * 5
4,810 EGP9,250 EGP -
ESM4900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 5 X 9
ESM4900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 5 X 9
4,836 EGP9,300 EGPESM4900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 5 X 9
4,836 EGP9,300 EGP -
DKG155 | DKG-155 MANUAL START UNIT
The DKG-155 is a microprocessor controlled unit designed to start and stop the genset manually using the key switch on the front panel.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
4,950 EGP9,000 EGPDKG155 | DKG-155 MANUAL START UNIT
4,950 EGP9,000 EGP -
DKG105 | DKG-105 AUTOMATIC MAINS FAILURE UNIT
The DKG-105 automatic mains failure unit is a microprocessor based digital unit offering all functions needed for the automatic control of a genset.
The unit fits into a standard 72x72mm panel meter opening and offers a very cost effective and
space saving solution for the basic genset control.In automatic mode, the unit monitors 3 phases of the mains voltage
5,390 EGP9,800 EGPDKG105 | DKG-105 AUTOMATIC MAINS FAILURE UNIT
5,390 EGP9,800 EGP -
DKG114 | DKG-114 MANUAL AND REMOTE START UNIT
The DKG-114 is a low cost, microprocessor controlled generator control unit designed to start and stop the genset both manually and remotely.
The manual control is made using the pushbuttons on the front panel. The remote control is made via the remote start input signal.
In the STOP position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,390 EGP9,800 EGPDKG114 | DKG-114 MANUAL AND REMOTE START UNIT
5,390 EGP9,800 EGP -
DKG116 | DKG-116 MANUAL AND REMOTE START UNIT
The DKG-116 is a low cost, comprehensive unit designed to start and stop a generating set both manually and remotely.
The unit is suitable for both gasoline and diesel gensets. The standard unit controls gasoline engines. Diesel engine control is selected with a wire jumper connection.The unit is only available in 12V version
5,390 EGP9,800 EGPDKG116 | DKG-116 MANUAL AND REMOTE START UNIT
5,390 EGP9,800 EGP -
ESM9900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 9X9
ESM9900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 9X9
5,408 EGP10,400 EGPESM9900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 9X9
5,408 EGP10,400 EGP -
ESM7730 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 7X7 *
ESM7730 | Process Control Device with Universal Input and Dual Set PROCESS CONTROLLER 7X7 *
5,408 EGP10,400 EGP -
ESM7700 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 7X7
ESM7700 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 7X7
5,450 EGP10,480 EGPESM7700 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 7X7
5,450 EGP10,480 EGP
