D200 | D-200 Advanced Genset Controlle
7,645 EGP13,900 EGP (-45%)
The D-200 is the lowest cost genset controller
ready for internet monitoring.
Despite small dimensions and low cost, its main
advantages are multifunctionality, support for
multiple topologies, harmonic analysis and detailed power measurements.
|
Diesel and gas genset support • 400Hz operation support • 400 event logs, full snapshot • All parameters front panel editable • 3 level configuration password • 128x64 graphical LCD display • Downloadable languages • Waveform display of V & I • Harmonic analysis of V & I • 16Amp MCB & GCB outputs • 6 configurable digital inputs • 5 configurable digital outputs • 3 configurable analog inputs • Standard MPU input • Optional CANBUS-J1939 • 3 configurable service alarms
|
• Dual mutual standby with equal aging of gensets • Manual “speed fine adjust” on selected ECUs • Automatic fuel pump control • Disable protections feature • Excess power protection • Reverse power protection • Overload IDMT protection • Load shedding, dummy load • Multiple load management • Current unbalance protection • Voltage unbalance protection • Fuel filling & fuel theft alarms • Idle speed control • Battery charge run enabled
|
• Combat mode support • Multiple nominal conditions • Contactor & MCB drive • 4 quadrant genset power counters • Mains power counters • Fuel filling counter • Fuel consumption counter • Modem diagnostics display • Configurable from USB & GPRS • Free configuration program • Allows SMS controls • Ready for central monitoring • Mobile genset support • Automatic GSM geo-location • Easy USB firmware upgrade • IP65 rating with optional gasket |
D200 | D-200 Advanced Genset Controlle
- AMF unit: Automatically starts and stops the genset in response to mains power failures.
- ATS unit: Seamlessly transfers loads between the mains and the genset for uninterrupted power supply.
- Remote start controller: Allows for remote starting and stopping of the genset.
- Manual start controller: Provides a manual interface for starting and stopping the genset.
- Waveform display of V & I: Displays voltage and current waveforms for analysis.
- Harmonic analysis of V & I: Analyzes harmonic distortion in voltage and current.
- CTs at genset or load side: Measures current for accurate monitoring and protection.
- Multi Genset synch & load share: Synchronizes and shares loads between multiple gensets.
- Remote display panel: Offers a remote interface for monitoring and control.
- Comprehensive synchronizing & load sharing capabilities: Ensures smoot
- Remote start controller: Enables remote control of the genset.
- Manual start controller: Provides a manual option for starting and stopping.
- Engine controller: Monitors and controls engine parameters
- Waveform display: Visualizes voltage and current waveforms.
- Harmonic analysis: Analyzes harmonic distortion
Reviews
There are no reviews yet.