Schneider 13975 | mini Kaedra - for modular device - 1 openings - 3 modules Subtotal: 440 EGP
D300 | D-300 Advanced Genset Controller
9,900 EGP18,000 EGP (-45%)
The D-300 is a cost effective, modern technology
genset controller ready for internet monitoring.
Its main advantages are multifunctionality,
support for multiple topologies, harmonic analysis and detailed
power measurements.
Datasheet
FEATURES
|
Diesel and gas genset support • 400Hz operation support • 400 event logs, full snapshot • All parameters front panel editable • 3 level configuration password • 128x64 graphical LCD display • Downloadable languages • Waveform display of V & I • Harmonic analysis of V & I • 16Amp MCB & GCB outputs • 8 configurable digital inputs • 6 configurable digital outputs • 3 configurable analog inputs • Both CANBUS-J1939 & MPU • 3 configurable service alarms • Multiple automatic exerciser • Weekly operation schedule
|
• Dual mutual standby with equal aging of gensets • Manual “speed fine adjust” on selected ECUs • Automatic fuel pump control • Disable protections feature • Excess power protection • Reverse power protection • Overload IDMT protection • Load shedding, dummy load • Multiple load management • Current unbalance protection • Voltage unbalance protection • Fuel filling & fuel theft alarms • Battery back-up real time clock • Idle speed control • Battery charge run enabled • Combat mode support |
D300 | D-300 Advanced Genset Controller
- AMF unit: Automatically starts and stops the genset in response to mains power failures.
- ATS unit: Seamlessly transfers loads between the mains and the genset for uninterrupted power supply.
- Remote start controller: Allows for remote starting and stopping of the genset.
- Manual start controller: Provides a manual interface for starting and stopping the genset.
- Engine controller: Monitors and controls the engine’s performance.
- Waveform display of V & I: Displays voltage and current waveforms for analysis.
- Harmonic analysis of V & I: Analyzes harmonic distortion in voltage and current.
- CTs at genset or load side: Measures current for accurate monitoring and protection.
- Multi Genset synch & load share: Synchronizes and shares loads between multiple gensets.
- Remote display panel: Offers a remote interface for monitoring and control.
- Comprehensive synchronizing & load sharing capabilities: Ensures smooth and efficient operation of multiple gensets.
Additional features:
- Uninterrupted transfer: Ensures seamless switching between mains and genset power.
- Remote start controller: Enables remote control of the genset.
- Manual start controller: Provides a manual option for starting and stopping.
- Engine controller: Monitors and controls engine parameters.
- Waveform display: Visualizes voltage and current waveforms.
- Harmonic analysis: Analyzes harmonic distortion.
- CTs: Measures current for accurate monitoring and protection.
Manufacturers:
- DATAKOM ELECTRONICS ENGINEERING A.S: A leading manufacturer of genset controllers and power supply solutions.
- INTEGRAL ELEKTRONIK LTD.STI: Another reputable manufacturer offering D300 genset controllers.
- TETRALINK TECHNOLOGIES TLT: Provides D300 controllers with advanced features.
Reviews
There are no reviews yet.