-
×
Schneider XACA6713 | Pendant control station, plastic, yellow, 6 push buttons, 1 emergency stop
1 × 5,019 EGP
Subtotal: 5,019 EGP
-
ESM4900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 5 X 9
ESM4900 | “Smart Output Module” Process Indicator PROCESS CONTROLLER 5 X 9
4,836 EGP9,300 EGP -
Schneider LC1DFKM7 | Capacitor contactor, TeSys D, 12.5 kVAR at 400 V/50 Hz, coil 220 V AC 50/60 Hz
Schneider LC1DFKM7 | Capacitor contactor, TeSys D, 12.5 kVAR at 400 V/50 Hz, coil 220 V AC 50/60 Hz
4,911 EGP6,727 EGP -
DKG155 | DKG-155 MANUAL START UNIT
The DKG-155 is a microprocessor controlled unit designed to start and stop the genset manually using the key switch on the front panel.
In the OFF position, the DC supply is removed from the module, thus zero power consumption is achieved.
4,950 EGP9,000 EGP -
HLF390 | MCB 3P 10kA C-100A 4.5M
HLF390 | MCB 3P 10kA C-100A 4.5M
5,015 EGP5,900 EGP -
Schneider XACA871 | Pendant control station, plastic, yellow, 8 push buttons
Schneider XACA871 | Pendant control station, plastic, yellow, 8 push buttons
5,019 EGP9,125 EGP -
Schneider 28912 | switch disconnector, Compact INS160 , 160 A, standard version with black rotary handle, 3 poles
Schneider 28912 | switch disconnector, Compact INS160 , 160 A, standard version with black rotary handle, 3 poles
5,193 EGP8,114 EGP -
Schneider A9R41463 | Acti 9 iID – RCCB – 4P – 63A – 30mA – type AC
Schneider A9R41463 | Acti 9 iID – RCCB – 4P – 63A – 30mA – type AC
5,215 EGP8,148 EGP -
Schneider TMC2AI2 | cartridge M221 – 2 analog inputs – I/O extension
Schneider TMC2AI2 | cartridge M221 – 2 analog inputs – I/O extension
5,238 EGP9,523 EGP -
Schneider TM3DQ8R | Modicon TM3 – 8 relay outputs (screw) 24Vdc
Schneider TM3DQ8R | Modicon TM3 – 8 relay outputs (screw) 24Vdc
5,316 EGP9,665 EGP -
DKG105 | DKG-105 AUTOMATIC MAINS FAILURE UNIT
The DKG-105 automatic mains failure unit is a microprocessor based digital unit offering all functions needed for the automatic control of a genset.
The unit fits into a standard 72x72mm panel meter opening and offers a very cost effective and
space saving solution for the basic genset control.In automatic mode, the unit monitors 3 phases of the mains voltage
5,390 EGP9,800 EGP -
DKG114 | DKG-114 MANUAL AND REMOTE START UNIT
The DKG-114 is a low cost, microprocessor controlled generator control unit designed to start and stop the genset both manually and remotely.
The manual control is made using the pushbuttons on the front panel. The remote control is made via the remote start input signal.
In the STOP position, the DC supply is removed from the module, thus zero power consumption is achieved.
5,390 EGP9,800 EGP