ESM-3700/1 | PROCESS CONTOLLER 3 * 7.
Roll over image to zoom in
4,060 EGP7,000 EGP (-42%)
ESM-3700/1 | PROCESS CONTOLLER 3 * 7.
– 4 digits display
– Easily changeable from front panel
– 5A or 60 mV AC, DC, AC/DC input
– Programmable scale from 5A to 9999A
– Alarm parameters
– Password protection for programming mode
– Remote access,data collecting and controlling with Modbus RTU
– AC, DC or True RMS measuring feature
– Having CE mark according to European Norms
ESM-3700/1 | PROCESS CONTOLLER 3 * 7.
visual inspection of this product for possible damage occurred during shipment is
recommended before installation. It is your responsibility to ensure that qualified mechanical
and electrical technicians install this product.
If there is danger of serious accident resulting from a failure or defect in this unit, power off
the system and separate the electrical connection of the device from the system.
The unit is normally supplied without a power supply switch or a fuse. Use power switch and
fuse as required.
Be sure to use the rated power supply voltage to protect the unit against damage and to
prevent failure.
Keep the power off until all of the wiring is completed so that electric shock and trouble with
the unit can be prevented.
Never attempt to disassemble, modify or repair this unit. Tampering with the unit may results
in malfunction, electric shock or fire.
Do not use the unit in combustible or explosive gaseous atmospheres.
During putting equipment in hole on the metal panel while mechanical installation some metal
burrs can cause injury on hands, you must be careful.
Montage of the product on a system must be done with it’s fixing clamps. Do not do the
montage of the device with inappropriate fixing clamp. Be sure that device
Additional information
| Brands | Emko |
|---|
Reviews
There are no reviews yet.